Aren’t you tired of pushing your bike to a bike shop just to borrow a pump? And what about alighting from your bike each time you notice the pressure in the tires is a bit low? It’s frustrating for sure. And it doesn’t make your riding experience any better.
Here’s the deal:
A bike pump is a must-have because it allows you to inflate your bike’s tires no matter where you are. Whether you’re cruising the city streets or you are riding in an environment where bike shops are non-existent, the best bike pump can be a lifesaver.
So which one should you choose? Check out the following recommendations.
Top Rated Bike Pumps Comparison & Rating Charts
Best Bicycle Pumps Reviews - We Picked Top Affordable & Cheap Bike Pumps
1. BV Bicycle Ergonomic Bike Floor Pump
Iconic in design, reasonably priced, and featuring an ergonomic build that makes it easy to handle, the BV Floor Pump is, by far, the best in the market.
BV takes on a modern design for the valve head, making it versatile enough to allow switching between Presta and Schrader valves.
The base is strong and stable, able to stay in position to allow you to pump air into your bike’s tires. The stability means no instance of wobbling and no moments of unnecessary pump movement.
You can step on either side of the base when pumping the tires. And you can be confident that a base this large will aid in filling up a tire faster with every single pump.
BV Floor Pump’s handle is a bit oversize, and for a good reason. Essentially, it gives you a comfortable grip, allowing you to pump a tire in one round without experiencing sweaty hands. With a handle this big, you don’t even have to worry about the possibility of your hands slipping from the pump.
This pump’s hose is 34 inches in length, long enough to allow you to pump your bike from a distance. The valve holds really well on the tire’s nozzle, allowing you to pump air without worrying about leakage. Plus, you can pivot the hose at 360 degrees, which, of course, makes air pumping easier.
2. Vibrelli Performance Bike Floor Pump
Based on thousands of positive reviews on Vibrelli Performance Floor Pump, a few things do stand out quite well.
First, the accuracy of the pump is up to scratch. Second, it’s easy to use, read, and lock.
Third, it works quickly and easily, filling up your bikes tires in just a couple of minutes.
This bike pump features a Rapid-T valve, which is compatible with Schrader and Presta valves. Changing from one valve to another is easy.
Just turn a switch and you’re good to go. And while you’re at it, you really don’t have to worry about air leaks because it’s almost nonexistent.
One of the best things about this floor pump is that it includes a glueless emergency puncture kit. This, if anything, is an essential toolbox that you’ll find handy when you get a puncture, especially in an area where a bike shop is nonexistent. You also get an inflatable device valve and a needle to inflate a ball.
The reinforced handle gives you a tight grip of the pump. Supported by a very strong steel barrel, the handle can pump and inflate tires to 160 PSI in just a couple of minutes. The pressure gauge isn’t just large and easy to read, it’s also accurate.
3. Vibrelli Mimi Bicycle Pump
Vibrelli Mini Bike Pump is a “super sweet little pump” with a valve system that’s compatible with Presta and Schrader valves. It’s so compact that it can fit even in a crowded backpack. And with a weight of just 8 ounces, this mini pump is the most lightweight option on this list.
At such an affordable price tag, it’s hard to imagine the possibility of finding a dual mode pump that works well. Yet Vibrelli harmoniously adds this functionality to this mini pump, allowing the 120 PSI telescope to switch from high pressure to high volume pumping and vice versa.
While Vibrelli Mini Bike Pump is compatible with Presta and Schrader valves, an automatic fitting to the pump head isn’t possible. Technically speaking, integrating either of the valves and correctly positioning the locking lever require a little bit of effort. But once you get a good seal, pumping the tire should be as easy.
After attaching the pump head to a Presta or Schrader valve, you’ll use the locking ring located at the bottom of the pump’s chamber to choose pressure or volume pumping. While pumping in volume mode is easy, it requires some effort to pump in pressure mode because of the short strokes.
4. Pro Bike Tool Bike Pump
If you’re in the market for an inexpensive bike pump that promises up to standard pumping performance, then you should try Pro Bike Tool Bike Pump. Designed for all types of bikes, this all-around bike pump can fill your tires and get you back on the trails in just a couple of minutes.
The design of this pick is similar to Lezyne bike pumps. And if you look closely, you’ll notice that it has a hose with a pressure gauge included. While the Pro Bike Tool Bike Pump doesn’t have the best pressure and volume pumping capability, the performance is downright adequate.
While it’s a compact option, which weighs just 4.5 ounces, this bike pump is well built and functional, yet quite affordable. And although primarily built for inflating bike tires, the pump is quite versatile, allowing you to inflate different objects including balls.
Measuring 23 centimeters long, this bike pump is quite small compared to the options we’ve looked at so far. To achieve a pressure point of something like 66 PSI in a 25c tire, you’ll need around 200 pumps. That’s not bad from a pump this small, but you should be ready to put in some extra effort to get to this pressure point.
5. Visnfa Portable Mini Bike Pump
Why ride a bike with low-pressure tires when you can use Visnfa to keep the wheels in good condition? Apparently, Visnfa is one of the well-made bike pumps that you can buy. And like the options we’ve already looked at in this guide, this mini portable model is an inexpensive pick that won’t break the bank.
In terms of design, the pedal bracket is made of grade 6063AL aluminum. The material is so lightweight, which explains why this pump only weighs 7.5 ounces.
It’s also durable and resilient, able to stand against elements like rust and moisture and work well long-term. As for the dimensions, the pump is 11 inches long with a hose length of 8.66 inches.
You will love this bike pump because it’s versatile. Not only is it compatible with Floating Ring, Presta, and Schrader valves, it also comes with a ball needle that you can use to pump pressure into different types of balls. The ability to fit different valves means you can use it on any bike type without integrating any kind of an adapter.
One of the most impressive things about this bike is the pressure gauge. As one of the few accurate reading meters that you can find in a bike tire, the gauge makes Visnfa pressure point very easy to read. Thanks to the accuracy, you don’t have to worry about under or over-pressurization.
6. AerGun X-1000
If you’re tired of your traditional bike pump and you’re seriously looking for a replacement, you should consider AerGun X-1000.
While old pumps can get the job done, this model can do the same job even faster, getting your tire filled up fast so you can get back to riding your bike in just a couple of minutes.
One thing is for sure about the AerGun X-1000: it works as expected. There’s nothing fancy about the design.
Only I should say that its simplicity is doubly impressive. Plus, the pump head works really well with Presta and Schrader valves with no adjustment whatsoever.
This bike pump costs a few bucks more than BV Ergonomic and Vibrelli Mimi bike pumps. But since it features an accurate pressure gauge, a sturdy plastic design, and a strong handle, the price point shouldn’t really be a deal breaker.
Even better is the fact that the AerGun X-1000 is a better alternative to pricier and fancier models like Silca Pista and SKS Rennkompresso Floor Pumps.
The automatic adjustment of the pump head to either Presta or Schrader valves is something worth mentioning. This, if anything, means you don’t have to struggle fitting the valve in. A gentle push to the foolproof head is enough, and then you can start pumping air into the tire.
7. Azuno Bike Tire Inflator
Azuno Tire Inflator is one of the best bike pumps. And it’s a good option to consider if you already have an air compressor in your home garage.
This inflator is dual chuck compatible with one side fitting the Schrader valve and the other fitting the Presta valve.
Since each head fits perfectly in their responsive valves, you don’t have to worry about disassembling.
There’s a thumb lever in the middle of the inflator, which is quite handy when it comes to locking the valves in tight position.
Once locked, you can air pump your bike tires without worrying about annoying air leaks that usually occur with traditional pumps.
The pump’s hose is about 40 inches long, which is quite lengthy for a more flexible pumping session. And since this inflator works with an air compressor, it completely takes away the need for a manual pump. This also means that you can inflate you’re a tire in just a couple of minutes.
One of the best things about this tire inflator is the flexibility of use. Primarily, you are going to use this to inflate your bike. And that’s exactly why we recommend it in the first place. But there are instances when you may need to inflate more than just a tire. And in such cases, you will find this tire inflator quite handy.
8. Crank Brothers Klic Hand Pump
Klic Hand Pump by Crank Brother looks a bit ordinary. And for a moment, you might mistake it for a low quality tire inflator that can’t make the cut.
Yet, it’s one of the few, not-so-popular options with notable features that you’d definitely want to see in a hand pump.
It looks like from the very beginning, Crank Brothers have always aspired to create a bike pump for mountain biker. And they’ve done exactly that with the Klic hand pump.
This pick is available in 3 distinct options. There’s a version that has a gauge, another pick that doesn’t include a gauge, and another one comes with an additional CO2 inflator.
Crank Brothers is apparently the only brand that has manage to use a magnet to attach the pump body to the hose. This technique eliminates the need to screw the hose to the pump body and then the body to the Presta or Schrader valve.
And if you’re wondering if this really works well or otherwise, the simple answer is yes. In fact, you will find it quite handy when inflating large tires. In practice, it should take you at least 150 strokes to inflate a 27c bike tire from flat to around 22 PSI.
9. GIYO Mini Bike Pump Portable
GIYO mini bike pump may not be among the most popular options. But it’s one of the options to consider if simplicity is really your think. You will love this bike because it’s lightweight, well priced, and good enough to pump a bike tire in just a few minutes.
As small as this bike pump is, you can be that it can inflate just about any bike tire size. GIYO gives it a rating of 120 PSI. You can easily get the pressure to 90 PSI with a few hundreds of strokes.
But getting your hybrid, road, or mountain bike’s tire to even 110 PSI will require a little bit of effort.
After all, this is a manual pump, which means you’ll need hundreds more strokes if you must achieve even a higher PSI.
One of the best things about this bike pump is the weight. At 7 ounces, this thing is so lightweight that you won’t even feel the weight in the first place.
And that means you can give the pump many strokes in a very short time without feeling tired. Plus, it has a rubber grip at the handle, which gives you a tight hold even in most environments.
10. Topeak Sport II Floor Pump
Whether you’re in the market for an inexpensive bike pump or you’re looking for an alternative to Topeak Jaw Blow Elite, Topeak Sport II is a good option to consider.
This floor pump weighs around 2Kgs, making it one of the heaviest options on this list. I like the fact that the barrel is steel and the base is large.
Because, if anything, this means that what you get for the price is a stable floor pump that can easily inflate your bike tires.
Keep in mind that the gauge is small and the hose is a bit short. But then again Topeak places them somewhere up the barrel for easy reach.
The gauge looks sleek, properly calibrated, and very easy to read. The data displayed on the gauge is accurate, means that the chances of over or under pressurization are completely nonexistent.
As you can see, the best bike pump doesn’t really have to be expensive. It just has to be good enough to get the tire inflation job done.